WAGNER Prima Sprint 3L, Перевод оригинального руководства по эксплуатации

Страница: 41 / 128

41
Prima Sprint .
2x
2x
P_01115
5
6
7
8
25
OPERATING MANUAL
VERSION 07/2009 ORDER NUMBER DOC 2305835
6.3
COATING PROGRAMS
Programs help to avoid having to make tedious setting adjustments, whenever the powder
or the workpiece is changed. All relevant parameters for coating a workpiece are collected
and saved under a program number.
These can be called up again as required using the program buttons.
With the EPG Sprint a program comprises the following parameters.
Overall air quantity (feed and dosage air quantity) [m³/h]
Powder quantity
[%]
Atomizing air/Tribo air [m³/h]
High-voltage [kV]
Current limiting
[µA]
U/I characteristics [standard, medium, soft]
The EPG Sprint control unit has 50 pre-defined programs. 4 of these can be selected
directly using buttons 5-8 and the remaining 46 by pressing button 25 above the
rotary controller 24. All programs can be adapted and stored by the user to suit individual
requirements.
Program 1 “surface parts“: High powder quantity, high powder charging.
Program 2 “second-coating“: Small powder quantity, low powder
charging.
Program 3 “profi les“: Medium powder quantity, low powder charging.
Program 4 “double click function“: Individual setting, activated by a
double click on the manual gun.
Programs no. 5 to 50: Can be selected with the rotary controller after
pressing the button.
Programs 5 to 50 are selected indirectly. The “additional programs“ button 25 must be
pressed fi rst. The yellow “additional programs“ LED then lights up and the LED display
indicates the current program number. The required program can be set by turning the
universal rotary controller.