WAGNER PEA-T3XL Series, Руководство по эксплуатации, Страница: 20 / 36

Rectification of malfunctions
20
0351701
- PEA-T3XL
05 / 2009
5. Rectification of malfunctions
05_Stoerung_T3.doc
Malfunction Cause Rectification
No Tribo current
(e.g. no wrap-
around or no powder
adhesion) - Inadequate or no powder
charging
- Electrical cable from spray gun
to control unit faulty
- Tribo current measuring or
display module defective
- Powder-conveying parts in
spray gun worn
- Contact Wagner Service
- Replace electrical cable
- Contact Wagner Service
- Replace worn parts
Poor wrap around
Back spray
- Inadequate or no ground - See chapter
" Grounding "
Powder outlet
uneven or
inadequate - Soiling
- Powder sintering or powder-
conveying parts in spray gun
worn
- Feed device soiled
- Feed air / dosage air ratio
incorrect
- Wear on powder injector noz-
zle
- Blow through parts carrying
powder
- Clean parts carrying powder
and replace if necessary
- See operating instructions for
the related devices connected
- Adjust at control module or
control unit
- Replace worn parts in the
powder injector 1.)
Spray pattern is
uneven - Parts of nozzle system worn - Replace worn parts
1.) You will find the wearing parts and spare parts in the operating instructions for the powder
injector.