manualshive.com logo in svg

WAGNER Jaguar 75-150, Руководство по эксплуатации

Поделиться
Скачать
WAGNER Jaguar 75-150 Скачать руководство пользователя страница 38

38

VERSION 02/2018

ORDER NUMBER DOC 2340282

IceBreaker 150-300 cm

3

 

7.5 

BASIC FLUSHING

Regular flushing

Regular flushing, cleaning and maintenance ensures the pump's high pumping and 

extraction capacity.
The cleaning and flushing agents used must be compatible with the working 

material.
Do not flush hardener pumps with water. Only flush them using suitable flushing 

agents (solvents).

WARNING

Incompatibility of flushing / cleaning agent with the working medium!

Risk of explosion and danger of poisoning by toxic gases.

Examine the compatibility of the flushing and cleaning agents and working media 

on the basis of the safety data sheets.

Flushing procedures

1. Visual check: personal safety equipment, grounding and all devices ready to use.
2. Place an empty, grounded collection tank (5) 

under the return tube (4).

B_04268

5

6

4

1

3

7

2

Closed

Open

3. Place the suction hose (7) in the grounded 

tank with flushing agent (6).

4. Adjust the pressure regulator (1) to approx. 

0.05 MPa; 0.5 bar; 7.25 psi.

Flushing via the return valve

5. Open return valve (3).
6. Slowly open the ball valve (2).
7. Adjust the air pressure on the pressure 

regulator (1) so that the pump runs smoothly.

8. Flush the system until clean flushing agent 

flows into the tank (5).

9. Close ball valve (2).

10. As soon as there is no pressure remaining in 

the system, close the return valve (3).

Flushing via spray gun

11. Point the spray gun, without nozzle, into the tank (5) and open it.
12. Slowly open the ball valve (2).
13. Rinse until clean flushing agent flows from the spray gun.
14. Close ball valve (2).
15. As soon as there is no pressure remaining in the system, close the spray gun.
16. Secure the spray gun.
17. Dispose of the contents of the tank (5) according to the local regulations.

External Cleaning

18. Clean the outside of the system.
19. Fully assemble the system.
20. Relieve the pump's pressure according to Chapter 

7.4

.

21. Dispose of the contents of the tank (5) according to the local regulations.

7.5.1  FILLING WITH WORKING MATERIAL

After basic flushing, the system can be filled with working product.

Proceed according to Chapter 

8.2.5

, but use working material instead of flushing agent.

Содержание Jaguar 75-150





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды