27
VERSION 02/2018
ORDER NUMBER DOC 2340282
IceBreaker 150-300 cm
3
5.6
OPERATING ELEMENTS
5.6.1 PRESSURE REGULATOR UNIT
B_05295
3
1
2
4
Designation
1 Pressure regulator
2 Ball valve
3 Pressure gauge
4 Compressed air inlet
1
2
3
B_03907
Positions of the ball valve
1 Closed: working pressure in the air motor will be relieved
(control pressure is still present).
2 Closed: The air motor may still be under pressure.
3 Open: working position
5.7
PRODUCT FILTER AND RETURN LINE
So that complete pressure relief of the pump can be performed (see Chapter
), a high-
pressure filter with a return line or a relief combination, is mandatory.
5.7.1 HIGH-PRESSURE FILTER (OPTION)
To ensure problem-free operation it is recommended that a WAGNER
high-pressure filter be used. These have been developed especially
for WAGNER pneumatic pumps. The filter inserts can be exchanged
depending on the product to be used. The high-pressure filter,
which corresponds to the device, can be found in Chapter
. The
compatible filter inserts can be found in Chapter
.
Preferred
Filter installation position
B_04265
B_04264
2
3
1
Closed
Open
53 MPa; 530 bar; 7687 psi
Pos Designation
1 Fluid section
connection
2 Product outlet
3 Return line
