manualshive.com logo in svg

WAGNER GM 4700AC, Руководство по эксплуатации, Страница: 28 / 80

Поделиться
Скачать
WAGNER GM 4700AC Скачать руководство пользователя страница 28

28

GM 4700AC

 

OPERATING MANUAL

VERSION 06/2014

ORDER NUMBER DOC2311730

7.2.1 

GENERAL RULES FOR MAKING ADJUSTMENTS TO THE SPRAY GUN

WARNING

Unintentional putting into operation!

Risk of injury

Before any work on the device, in the event of work interruptions 
and malfunctions:

 Switch off  the energy/compressed air supply.
  Relieve the pressure from the spray gun and unit.
  Secure the spray gun against actuation.
  In the event of functional faults, remedy the fault as described in 

the "Troubleshooting and rectifi cation" chapter.

 Observe 

safety instructions

 in Chapter 4.

WARNING

High-pressure spray jet!

Danger to life from injecting paint or solvent

  Never reach into the spray jet.
  Never point the spray gun at people.
  Consult a doctor immediately in the event of skin injuries caused 

by paint or solvent. Inform the doctor about the paint or solvent 
used.

  Never seal defective high-pressure parts; instead relieve the 

pressure from them and replace them.

  Wear the appropriate protective clothing, gloves, eyewear and 

respiratory protection.

Содержание GM 4700AC

















































































Отзывы:

Нет отзывов