WAGNER FOLIATEC Spray system, Руководство пользователя

Страница: 23 / 58

19
03/2015
GB
•
Before working on the device, remove the power plug from the socket.
•
Cover areas that are not to be sprayed. When working keep in mind that wind, for
example, may transport paint mist over great distances and cause damage.
•
Do not lay the spray gun.
With original WAGNER/FOLIATEC accessories and spare parts, you have the guarantee
that all safety regulations are fulfilled.
4. Description/ Scope of delivery
Description/ Scope of delivery (Fig. 1)
1 Air cup 9 Spray gun holder
2 Nozzle 10 Mains lead
3 Union nut 11 Air filter cover
4 Spray gun 12 Container
5 Trigger 13 Replacement air filter (2 pcs.)
6 Material volume regulation 14 Replacement nozzle seal*
7 Air hose 15 Lubricating grease (without illustration)*
8 Combined ON/OFF and speed switch
* This is inside the container: remove it before starting operations!
5. Field of application
The spray system was developed to process materials for the automotive area (in particular
spray film).
6. Coating Materials Suitable for Use
Spray film, water- and solvent-based paints, primers, 2-component, staining sealers and
wood sealer-preservatives.
7. Coating Materials Not Suitable for Use
Materials that contain highly abrasive components, facade paint, caustic solutions and
acidic coating substances.
8. Preparation of the Coating Material
i
Please ensure that the processing instructions of the manufacturer of the
material are observed.
The enclosed spray gun can be used to spray paints that are undiluted or slightly diluted.
Detailed information is available in the data sheet of the manufacturer of the material
(enclosed).
1.
Stir the material up and put the required amount into the paint container.