Operating manual Universal Control Unit for Powder Spray Guns EPG-SPRINT XE
16 Appendix Device Configuration
Order number 2354913 | Edition 10/2022
71
EPG
SPRINT X
0
%
kV
80
60
40
20
100
Tri
Cor
5
4
3
2
1
120
80
40
20
10
2.0
µA
P_05026
19
18
25
4
If you want to save the changed setting, press the [Additional recipes] button (25)
to save the setting until the blue [Flushing] LED (18) no longer flashes. The LED
display (19) then shows the parameter number again (in this example, C11).
Proceed in the same way for all other parameters. The list below provides an
overview of all the other parameters.
EPG
SPRINT X
0
%
kV
80
60
40
20
100
Tri
Cor
5
4
3
2
1
120
80
40
20
10
2.0
µA
P_01763
15
2. To exit the configuration, switch control unit to standby mode by pressing the
[Standby] button (15). Pressing this button again returns the control unit to normal
operating mode.
16.2 SETTING EXAMPLE: PARAMETER C13
The lock is activated and deactivated with this parameter. The control unit is factory-set to
OFF (lock deactivated).
