WAGNER Cobra 40-10 Скачать руководство пользователя

Страница: 17 / 84

VERSION 01/2018

ORDER NUMBER DOC 2340851

Cobra 40-10 / 40-25

4.2.7 MAINTENANCE AND REPAIR
Hazard due to improper maintenance and repair!

Danger to life and equipment damage.

Only a WAGNER service center or a suitably trained person may carry out repairs and

replace parts.
Use only WAGNER original spare parts and accessories.
Do not change or modify the device; if change is necessary, contact WAGNER.
Only repair and replace parts that are listed in the

"Spare parts" chapter and

that are assigned to the unit.
Do not use any defective components.
Exclusively use accessories listed in Chapter

and that are assigned to the unit.

Before all work on the device and in the event of work interruptions:

- Relieve the pressure from the spray gun, high-pressure hoses and all devices.

- Secure the spray gun against actuation.

– Switch off the energy and compressed air supply.

- Disconnect the control unit from the mains. Secure the spray gun against

actuation.
Observe the operating and service manual for all work.

4.2.8 PROTECTIVE AND MONITORING EQUIPMENT
Hazard due to removal of protective and monitoring equipment!

Danger to life and equipment damage.

Protective and monitoring equipment must not be removed, modified or rendered

unusable.
Regularly check for perfect functioning.
If defects are detected on protective and monitoring equipment, the system must

not be operated until these defects are remedied.

Содержание Cobra 40-10





















































































Результаты поиска

Содержание Cobra 40-10

Отзывы:

Похожие инструкции для Cobra 40-10

Бренды по названию

Популярные бренды

WAGNER Cobra 40-10, Оригинальное руководство по эксплуатации

Результаты поиска

Содержание Cobra 40-10

Отзывы:

Похожие инструкции для Cobra 40-10

Бренды по названию

Популярные бренды