background image

59

OPERATING MANUAL

VERSION 05/2017

ORDER NUMBER DOC 2357061

7.8 

MANUAL MODE: OPEN VALVES

The buttons with reversed colors show our 

current location:

Select paint recipe (for A/B/C/D).

Or select flushing valve (for A/B/C/D flushing valves).

Menu

Status of selected valve

Manual operation

Valves

Touch to change

Current flow

Flow rate since 

the valve was last 

opened

Set product 

pressure.

(Only with 

"Automatic product 

pressure regulator" 

option, see Chapter 

7.13.2

.)

Open several valves / output 

signals at the same time

 With password level 3, 

see Chapter 

7.13.2

.

Leak inspection 

(only for piston pumps with 

stroke sensor)

 see software documentation

B_06467

Leak 

inspec.

Menu

 cc / min

Q

  cc

Vjob

Output

A

B
C

D

A
B
C

D

bar

Valve is closed

Valve is open

Displays list of A/B/

C/D flushing valves.

Select component 

A/B/C/D.

Valve used by paint recipe.

(See other used valves: buttons A/B/C/D.)

Manual mode is used for troubleshooting or to fill a pump, for example.
Only one valve can be opened at any one time. If another valve is touched, the controller 

closes all valves.
With a gun flush box, the valve for the gun is also opened: either for gun 1 (if gun 1 or 1+x 

is selected on the home page), or for gun 2 (if gun 2 is selected on the home page).

Ext. flushing agent

The valve for the external flushing agent can not be opened on this page. If necessary, the 

calibration function can be used for this, without saving the measured value (password 

level 2, Chapter 

7.12

).

Содержание 2K COMFORT

































































































































Отзывы: