3
4
Smart AC Inverter 100 USB by Wagan Tech
User’s Manual—Please read before using this equipment
© 2009 Wagan Corporation. All Rights Reserved.
Wagan and wagan.com are trademarks used by Wagan Corporation.
Troubleshooting
Problem:
AC, DC, USB product does not operate; green light is not illuminated.
Probable cause
Suggested solution
AC product connected is rated
at more than 90 watts; overload
shutdown occurs.
Use product with a power rating of
less than 90 watts
High starting surge has caused
overload shutdown even though AC
product connected is rated at less
than 200 watts.
Product exceeds inverter’s surge
compatibility. Use a product with
starting surge power of less than
200 watts
Lighter socket or 2 volt outlet may
require the vehicle’s ignition to be
switched on.
Turn the ignition key to accessory
position
Poor contact with lighter socket or
2 volt outlet.
Press inverter firmly into the lighter
socket. Make sure the socket is clean.
Car battery is discharged
Recharge the car’s battery
Fuse blown by heavy load.
Replace the 5A slow blow fuse by
unscrewing the fitting in the positive
connector
Problem:
Buzzing sound in audio systems
Probable Cause:
Inexpensive stereo systems have an inadequate internal
power supply filtering which causes a buzzing sound. A system with a high
quality filter is the only solution.
For additional technical support please e-mail [email protected]
WARNING! Shock hazard
The Smart AC Power Inverter generates the same AC power as a normal
household wall outlet.
Do not open (the parts inside can not be replaced or serviced).
Do not insert foreign objects into the outlet or USB port.
Do not expose to water, rain, or snow.
Do not connect to power utility AC distribution wiring.
*Failure to follow any of the above precautions may result in personal injury
and/or damage to the inverter.
WARNING! Heated surface
The outer case of the Inverter may become warm, reaching 65°C (50°F)
under extended high power operations. During these kinds of operations,
keep the inverter away from materials that may be affected by high
temperatures.
CAUTION
Refer to the battery manufacturer’s safety instructions for proper
battery installation and operation.
Neutral floating: do not connect any AC, DC, or USB products
whose neutral conductor is connected to the ground to the inverter.
The output of the inverter is Modified Sine Wave. Some battery
chargers for power tools and appliances may not work properly.
Please, contact the manufacturer for the appliances before using the
inverter.
•
•
•
•
•
•
•
