3
4
Hi Speed Air Compressor by Wagan Tech
User’s Manual—Read before using this equipment
All Rights Reserved ©2010 Wagan Corporation
Wagan and wagan.com are trademarks used by Wagan Corporation
• Use only 12V direct current power sockets. Do not use product with any
other type of power source.
• Do not tangle the power cord together to avoid potential electrical
danger.
• If the unit emits abnormal noise while in use, please stop use
immediately and check for causes and problems.
• Keep away from children.
• Avoid dropping the product and/or cause severe impact to the
compressor.
• Do not overexpose the unit to direct sunlight or store the unit under
sunlight.
• Do not use in damp areas or around flammable materials.
• Do not attempt to make any modifications, disassemble or repair by
yourself or by any non-technicians.
Using the Air Compressor
(Images on page 5)
1. Attach the air nozzle to the tire valve and tighten it clockwise.
2. Turn on the car engine.
3. Plug the 12V DC adapter into the cigarette lighter socket.
4. Press the Power Switch to ON to start the air compressor. Carefully
observe the air pressure using the Pressure Gauge and press the Power
Switch to OFF once the desired PSI level is reached.
5. Twist the air nozzle off the tire valve counter-clockwise and remove the
12V Adapter out from the cigarette lighter socket.
6. Turn off the car engine.
7. Wrap the wire and air hose and tuck them into their locking slots.
4-LED Light
The Hi Speed Air Compressor features a 4-LED light in the front to help while
working at night. Simply press the Light button just above the light to turn it on.
Press it again to turn off. It requires the 12V DC adapter to be plugged in and
powered.
Specifications
Working Voltage
12V DC
Rated Power
120W (10 Amps)
Max Run Time
15 minutes
Flow Rate
35 L/min (1.24 ft³/min)
Air Hose
60 cm (23.6 in)
DC Power Cord
3 m (10 ft)
Max PSI
100
Weight
1.55 Kg (3.42 lbs)
Attach Nozzle to
tire valve.
Plug DC Adapter
into power socket.
Turn on compressor,
check pressure gauge.