Wagan 2403 AC Inverter, Руководство пользователя

Страница: 12 / 20

AC Inverter
™
8,000 Watt DC to AC Power Inverter by Wagan Tech
®
11
www.wagan.com
Fusing Requirements
NOTE: It is important that for this 8,000 watt inverter has main battery fuses connected to the
positive (+) battery cable(s) as close as possible to the connected battery bank’s positive terminal.
The fuse amperage rating must be sized to allow simultaneous operation of all the AC appliances
to be powered, allowing for the momentary high start-up current requirements of inductive loads.
Use the recommended fuse block (fuse holder) and fuse, or an electrical equivalent. ANL type
fuses and fuse holders are readily available from marine supply dealers. The fuse and fuse holders
may be connected in parallel to provide the required protection. There are larger capacity fuses
and fuse holders available. Make sure that if the inverter is operating at 8,000 watts that the
battery is fused at greater than 800 amps.
The fuses are very important to protect equipment, batteries and personnel. The fuses protect
against battery explosion if the cables that connect to the inverter accidentally short.
READ AND COMPLY WITH THE WARNING BELOW.
WARNING
EXPLODING BATTERIES CAN SPRAY MOLTEN LEAD, HOT SULFURIC ACID AND OTHER METAL AND
PLASTIC FRAGMENTS. BATTERIES THAT ARE CHARGING OR UNDER HIGH DISCHARGE RATES
PRODUCE EXPLOSIVE HYDROGEN GAS INTO THE SURROUNDING AREA. BE SAFE - FUSE THE
BATTERY BANK AND MAKE SURE THE BATTERIES ARE PROPERLY VENTILATED.
Battery Bank Diagram