Operation
30
5.2
Connections
Connection sockets (fig.
3
, page 3):
6
Operation
6.1
Before initial use
I
Note
Before starting your new cooler for the first time, you should clean
it inside and outside with a damp cloth for hygienic reasons (please
also refer to the chapter “Cleaning and maintenance” on page 37).
The handles are enclosed unassembled. If you wish to attach the
handles, proceed as follows:
➤
Make a handle by putting two holders (fig.
4
1, page 4) and a
handle (fig.
4
2, page 4) together.
➤
Fasten the grip with the enclosed screws in the holes provided.
Selecting the temperature units
You can switch the temperature display between Celsius and
Fahrenheit. This is how to do it:
➤
Switch on the cooler.
➤
Press the “SET” button (fig.
2
4, page 3) twice.
➤
Use the “UP +” (fig.
2
6, page 3) and “DOWN -” (fig.
2
7,
page 3) buttons to select Celsius or Fahrenheit.
✓
The selected temperature units then appear in the display for a
few seconds. The display flashes several times before it returns
to the current temperature.
Item Description
1
Connection socket AC voltage supply
2
Fuse holder
3
Connection socket DC voltage supply
_CF-80_110.book Seite 30 Freitag, 11. September 2009 3:45 15
www.busse-yachtshop.de | [email protected]
