EN
Initial start-up
BMW 2500G
84
7.4
Entering company data
The company data is printed out with every service log.
1. In the basic menu, use the cursor keys
or
to select
“Other
selections”
:
2. Press
ENTER
to confirm.
3. Use the cursor key
to select
“Service”
.
4. Press
ENTER
to confirm.
5. Enter the password
“3282”
.
6. The company data is shown in the third line of the display (
7
).
You can enter five lines, each with up to 20 characters.
The display shows the number of lines of company data after the
message
“Enter company data”
(
“01”
to
“05”
).
Use the cursor keys
or
to select the line of company data you
want.
7. Use the keypad (
8
) and the cursor keys to enter the data.
To switch between upper and lower case, press the Info key
.
To delete a character, briefly press the
C
key.
To delete the current line, press and hold down the
C
key.
8. Press
ENTER
to confirm.
9. Press
STOP
. The set data is activated.
10. Press
STOP
again to access the standby menu.
Short selection
Free selection
Other selections
ENTER-OK
WaecoBMW2500G_OPM_4445102371_EMEA(de-en-es-fr-ru)_202x-xx-xx.book Seite 84 Freitag, 30. Oktober 2020 6:49 18
