Wacom Inkling MDP-123, Руководство пользователя

Страница: 32 / 48

32
Index Contents
32
Index Contents
SETTINGS TABS
C
LICK
T
HRESHOLD
Use this tab to calibrate your pen click threshold to the inking cartridge.
1. To adjust the click threshold, clip the Inkling receiver to a typical piece
of sketching paper and then connect the receiver to your computer
using the included USB cable or any other USB to USB Mini-B cable
(commonly available).
2. As soon as you connect the receiver to the computer, the pen will start
moving the screen cursor.
3. Find the area on your paper that moves the screen cursor within the
test area on this tab.
4. Then sketch a couple of typical lines in that area and compare them
with the digital lines in the test area on this tab.
5. If needed, use the slider to adjust the click threshold until the start and
end of the digital lines correspond to the start and end of the ink lines
on the paper.
Tips:
• Wacom recommends you calibrate the click threshold before using a
new pen, and when switching to inking cartridges of a different brand
or ball size.
• If you accidentally set the setting too soft for your pen, the tip will draw
even when it does not touch the paper. Use a mouse or trackpad to
change the click threshold slider to a harder setting and try again.
Sketching area