20
20
VIEWING AND UPLOADING A SKETCH
After you have finished sketching, connect the Inkling receiver to your computer. Upload the files to your
computer for further editing.
1. Attach the small end of the provided USB cable to the
receiver. Connect the other end to a primary USB port
located directly on your computer, or to a powered
USB hub. The power LED will glow green or red,
depending on battery charge.
The Inkling Sketch Manager will open automatically.
The folder tree will show the M
Y
S
KETCHES
folder,
located on the receiver. This is where your sketch files
are located.
2. Use the
to work with your
sketch files.
3. Move files from the Inkling receiver to your computer.
•
Drag file thumbnails to a folder tree location.
•
In the toolbar, choose F
ILE
and select a S
AVE
option.
•
Right-click on a thumbnail and choose the C
OPY
TO
... option.
4. When you are done working, close the Sketch
Manager.
5. Before disconnecting the receiver, use the S
AFELY
R
EMOVE
H
ARDWARE
(Windows) or E
JECT
(Macintosh)
system option. Then disconnect the receiver from
your computer. The receiver turns off automatically
when disconnected.
Tip: You can also work with sketch
files when the Inkling charging case
is connected to your computer and
the receiver is located within the
case.
