Page 13
iMAC REQUIREMENTS
Graphire requires Mac OS 8.5 or greater and Mac OS ROM 1.2.1 or greater.
1.
Verify the Mac OS and ROM versions:
Click on the Apple icon and select A
BOUT
T
HIS
C
OMPUTER
.... The A
BOUT
T
HIS
C
OMPUTER
dialog box will appear with the OS version displayed in the top right corner. Mac OS 8.5 or greater is required.
If the version shown is older than Mac OS 8.5, contact your local computer dealer to purchase an upgrade.
If Mac OS ROM version 1.2.1 or greater displays under the Mac OS version, your iMac does not need the firmware or OS
ROM update. If it does not appear or an older Mac OS ROM is installed, continue with the instructions below to install the
I
M
AC
F
IRMWARE
U
PDATE
and then install
I
M
AC
U
PDATE
1.1.
2.
Install the iMac Firmware Update:
In the A
PPLE
I
M
AC
U
PDATES
folder located on the Graphire CD, double-click on the
I
M
AC
F
IRMWARE
U
PDATE
icon. This will decompress the file. Within the open folder that appears on the desktop, double-
click on the
I
M
AC
F
IRMWARE
U
PDATE
icon and follow the prompts. If in doubt, install this update.
3.
Install iMac Update 1.1:
Install
I
M
AC
U
PDATE
1.1 by double-clicking on the
I
M
AC
U
PDATE
1.1 icon located in the A
PPLE
I
M
AC
U
PDATES
folder. This will decompress the file. Within the open folder that appears on the desktop, double-click on the
I
M
AC
U
PDATE
icon and follow the prompts. If in doubt, install this update.
4.
After updating your system, perform the
Each time you start your computer, the Wacom Tablet startup icon tells you if the tablet
driver has successfully loaded.
The driver is loading.
The driver has loaded
successfully.
The driver did not load.
The driver loaded, but a Wacom
tablet cannot be found. The tablet
may be unplugged.
