Wacom CTL-672, Руководство пользователя

Страница: 44 / 61

Map your device in pen mode
In
Pen
mode, you use the pen like a regular pen, and you interact with the device as if it is your paper. Each point on
the device maps absolutely to a specific point on your monitor, and the cursor jumps to the corresponding point on
your monitor when you place your pen on the device.
If you select Pen mode, you can see a representation of how your device maps to your monitors on the Mapping
tab. If you want a different mapping than what is shown, you can change it.
1. In Wacom Tablet Properties, select your pen from the Tool list and then select the Mapping tab.
2. From Mode, select
Pen
.
By default, the active area of the device maps to your entire monitor. If you are using more than one
monitor, the device maps to all monitors.
CAUTION : If you change the display properties in your computer's display menu, you are also
changing the mapping on this tab.
3. From Screen Area , select which part of your monitor that you want the device to map to:
Select
Full
if you want to map to the entire area of the monitors connected to your computer.
Select
Portion
if you want to define a section of your monitor to map to. Select the section in any of the
following ways:
Under
Drag Handles
, drag the corners of the red border to define the screen area that you want
to map to.
Select
Click to Define
and use your cursor to select the screen area that you want to map to.
Enter Coordinates in pixels.
Select a
Monitor
if you want to map to the entire area of a single monitor.
4. From Tablet Area , select which part of your device that you want mapped to the Screen Area you selected.
The options are similar to the
Screen Area
options.
5. Select
Force Proportions
if you want the vertical and horizontal proportions to be the same on your device
as on your monitors.
If you select
Force Proportions
and draw a circle on the device, it displays as a circle on the screen,
but a portion of the device active area may no longer be usable.
If you do not select
Force Proportions
and draw a circle on the device, it might display as an ellipse on
the screen.
Tip
: To help you decide which setting to select, watch the red borders of the image on this tab while
selecting and unselecting
Force Proportions
to see how it affects mapping.
User's Manual
44
44