Wacom CTL-672, Руководство пользователя

Страница: 16 / 61

Replace the pen nib
Tip
: Replace your pen nib when it is approximately 1 mm (1/25 inch) or has a sharp edge.
1. Use the nib removal tool to remove your pen nib. There is a small hole in the pen stand, case, pen end, or pen
holder depending on what was included with your device.
Nib removal tool Hole in stand or case
2. Get a replacement nib and slide the end of the new nib straight into the barrel of the pen.
3. Push the nib in slowly and firmly until it stops.
Where to find replacement nibs
The extra nibs are stored in different places for different devices. First, look in the box that your device was
packaged in. If you do not see the nibs there, try these places:
If your device included a pen case, check there.
If your device has a removable compartment cover on the back, slide it open.
If your device included a pen stand, unscrew the pen stand.
Tip for the Pro Pen 2 stand
: To screw the stand back together, line up the dots on the bottom of the
stand and the recess. Then, gently guide the bottom of the stand to the right until you feel it click into
place.
If your device includes a pen holder attachment, check there.
If your device has built-in stand legs, the replacement nibs may be located underneath one of the legs.
If you need more nibs, you can purchase them from the Wacom Store .
Where to find the nib replacement tool
For some devices, the nib replacement tool is a metal ring included with your device.
For other devices, you will need to use the nib replacement hole to remove your pen nib. The nib replacement hole
can be found in a variety of places depending on your device.
On the bottom of your pen stand
On the pen storage case
On the pen holder attached to your device
Underneath one of the built-in stand legs.
User's Manual
16
16