Wacom Cintiq Pro 32, Руководство пользователя

Страница: 345 / 452

Con fi guring 802.1x Network Device Authentication
This section describes the components you need to con fi gure 802.1x authentication, and the
detailed steps you need to follow to con fi gure the authentication.
Preparing for 802.1x Con fi guration
The supported 802.1x con fi guration has the zero client pre-populated with a proper certi fi cate. It
then connects and presents the certi fi cate to the 802.1x switch and is authenticated. PCoIP Zero
Clients will also connect under a different con fi guration of the switch which has the MAC address
of authorized endpoints stored in it's con fi guration.
Before you begin the con fi guration process, make sure you have these components:
• Tera2 PCoIP Zero Client with fi rmware 4.0.3 or later
• PCoIP Management Console 1.8.1 or later
• Windows Server 2008 R2 with AD DS (Active Directory Domain Services)
• Windows Server 2008 R2 with AD CS (Active Directory Certi fi cate Services)
• Windows Server 2008 R2 with NPS (Network Policy and Access Services)
Setting Default AWI OSD Management
Console
Enable 802.1x security
   
Identity
   
Authentication TLS (this is the only available
setting)   
Client Certi fi cate    
Enable 802.1X Support for Legacy
Switches
   
Con fi guring 802.1x Network Device Authentication
© 2020 Teradici 345