Wacker Neuson RC50, Инструкция по эксплуатации

Страница: 120 / 222

Maintenance
General maintenance instructions
120 BA RC50_RC70 en 00
4 MAINTENANCE
N O T E
When working at the machine please always adhere to the
instructions given in your Safety instructions!
4.00 General maintenance instructions
This section describes the work on the machine required for its care and
to maintain operational safety.
The extent and the frequency of the maintenance work depends on the
operating and deployment conditions, which may differ in many cases.
In case of more difficult operating conditions, the machine must have
maintenance in shorter intervals as scheduled for normal operation.
The maintenance intervals are based on the operating time indicated by
operating hours meter.
Various warning and pilot lights make the driver aware of essential
interventions during operation.
Additional maintenance work must be carried out in the running-in
time.They are described in the running-in regulations.
The running-in regulations, servicing intervals and care measures for
diesel engine muast be adhered as specified in the instruction manual of
the diesel engine manufacturer.
4.00.01 Important information about maintenance works
Testing and maintenance work require expert knowledge. Only trained,
specialist personnel may perform the maintenance work.
The warning notices indicated below apply to all maintenance work:
WARNING
Unintended machine movement!
Severe injury or death due to unexpected machine movements during
maintenance work.
■
Park the machine on safe ground, i.e., flat and horizontal ground
with sufficient bearing capacity.
■
Secure machine against rolling away.
■
Do not carry out any maintenance work unless the engine has
been stopped and the ignition has been switched off.
■
On machines with safety strut, apply the safety strut before
maintenance work.