background image

 wc_si001097en.fm

18

Safety Information

LTS

Personal 
Protective 
Equipment 
(PPE)

Wear the following personal protective equipment (PPE) while servicing or 
maintaining this machine:

Close-fitting work clothes that do not hinder movement

Safety glasses with side shields

Hearing protection

Safety-toed footwear

In addition, before servicing or maintaining the machine:

Tie back long hair.

Remove all jewelry (including rings).

   

 

1.6

Operator Safety while Using Internal Combustion Engines

Operating 
safety

When running the engine:

Keep the area around the exhaust pipe free of flammable materials.

Check the fuel lines and the fuel tank for leaks and cracks before starting the 
engine. Do not run the machine if fuel leaks are present or the fuel lines are 
loose.

Do not smoke while operating the machine.

Do not run the engine near sparks or open flames.

Do not touch the engine or muffler while the engine is running or immediately 
after it has been turned off.

Do not operate a machine when its fuel cap is loose or missing. 

Do not start the engine if fuel has spilled or a fuel odor is present. Move the 
machine away from the spill and wipe the machine dry before starting.

Do not use the machine in areas with risk of explosion or fire.

Refueling 
safety

When refueling the engine:

Clean up any spilled fuel immediately.

WARNING

Internal combustion engines present special hazards during operation and fueling. 

Failure to follow the warnings and safety standards could result in severe injury or 

death.

Read and follow the warning instructions in the engine owner’s manual and the 
safety guidelines below. 

DANGER

Exhaust gas from the engine contains carbon monoxide, a deadly poison. 

Exposure to carbon monoxide can kill you in minutes.

NEVER operate the machine inside an enclosed area, such as a tunnel, unless 
adequate ventilation is provided through items such as exhaust fans or hoses.

Содержание LTS4K





















































































Отзывы: