Wacker Neuson KRAMER 5055e Скачать руководство пользователя страница 82

Страница: 82 / 420

4-10

BA 357-00 * 3.0 * 35700_04_Inbetriebnahme_01.fm

4 Putting into operation

Horizontal adjustment

1. Sit down on the operator seat.
2. Pull lever

up and at the same time, move the operator

seat forward or backward.

3. Release the lever on reaching the required position.

➥

Once the operator seat is adjusted, engage the lever in the required
position. It must not be possible to move the operator seat to
another position.

Backrest adjustment

1. Sit down on the operator seat.
2. Pull handle

up and at the same time, move the operator seat forward

or backward. The backrest is angled into the desired position:

➥

Operator seat moved forward – flatter backrest inclination.

➥

Operator seat moved backward – steeper backrest inclination.

3. Release the handle if the adjustment is correct.

307b0330.ai

Fig. 56

307b0350.ai

Fig. 57

Содержание KRAMER 5055e





































































































































































































































































































































































































































Результаты поиска

Содержание KRAMER 5055e

Отзывы:

Бренды по названию

Популярные бренды

Wacker Neuson KRAMER 5055e, Руководство оператора

Результаты поиска

Содержание KRAMER 5055e

Отзывы:

Бренды по названию

Популярные бренды