Wacker Neuson KRAMER 5055e Скачать руководство пользователя

Страница: 74 / 420

4-2

BA 357-00 * 3.0 * 35700_04_Inbetriebnahme_01.fm

4 Putting into operation

Safety instructions on entering and exiting

CAUTION

Falling hazard when entering or exiting!

Entering or exiting incorrectly can cause injury.

►

Keep the mandatory climbing aids clean.

►

Use the mandatory climbing aids for entering and exiting the machine.

►

Face the vehicle as you enter and leave it.

►

Have damaged climbing aids replaced.

Opening / closing the cabin door

CAUTION

Crushing hazard due to incorrectly locked door!

Failure to observe this can cause injuries to arms and hands.

►

Before starting machine travel, lock the door
or secure it in the door arrester.

Opening the door from outside

1. Unlock door lock with the ignition key (turn to the right).
2. Press door button

Close door from the outside

1. Lock door lock with the ignition key (turn to the left).

Opening the door from inside

1. Push handle

up.

Information

The machine has a one-key system. All locks (e.g. cabin, ignition lock and
battery cover) are opened or closed with the ignition key.

Fig. 47

Fig. 48

Содержание KRAMER 5055e





































































































































































































































































































































































































































Результаты поиска

Содержание KRAMER 5055e

Отзывы:

Похожие инструкции для KRAMER 5055e

Бренды по названию

Популярные бренды

Wacker Neuson KRAMER 5055e, Руководство оператора

Результаты поиска

Содержание KRAMER 5055e

Отзывы:

Похожие инструкции для KRAMER 5055e

Бренды по названию

Популярные бренды