Wacker Neuson KRAMER 5055e страница 32 Скачать руководство пользователя | Manualshive

Страница: 32 / 420

background image

2-20

BA 357-00 * 3.0 * Sicherheit_E.fm

2 Safety

Battery

• The charging, maintenance and changing of the battery may

only be carried out by persons who are trained to do so.

• Always observe the information provided in this Operator's Manual and

the instructions provided by the battery manufacturer.

• Batteries contain poisonous and caustic substances (e.g. sulfuric acid).

When handling the battery observe the specific safety instructions and
regulations relevant to accident prevention.

• Do not smoke or use an unprotected light or open flame when working

around batteries.

• When charging or maintaining the battery, no flammable substances or

operating materials that create sparks may
be in the area of the vehicle.

• A volatile oxyhydrogen mixture forms in batteries during normal

operation and especially during charging. Always wear gloves and eye
protection when working with batteries.

• Perform battery maintenance only in well-ventilated areas

(e.g., due to explosive vapors, explosion hazard).

• Keep flame retardants (e.g. fire extinguisher) near at hand.
• Keep the cell lid of the battery clean and dry.
• Keep the terminals and cable lugs clean and lightly grease with

terminal grease.

• Take care that the terminals and cable lugs are firmly seated.
• Before closing the battery cover plate, make certain that no cable can

be damaged.

• Measures to be taken in case of contact with battery acid.

- Battery acid on the skin:

remove wet clothes. Dab wet parts of skin with cotton or paper towel
and flush them thoroughly under running water.
Then wash thoroughly with soap.

- Battery acid in eyes:

wash eyes under running water.
Consult an ophthalmologist immediately.

«
...
30
31
32
33
34
...
»

Содержание KRAMER 5055e





































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для KRAMER 5055e

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды