manualshive.com logo in svg

Wacker Neuson KRAMER 5055e, Руководство оператора

Поделиться
Скачать
Wacker Neuson KRAMER 5055e Скачать руководство пользователя страница 302

7-50

BA 357-00 *  3.0 * 35700_07_Wartung.fm

7 Maintenance

7.8

Cooling system

Safety instructions regarding the cooling system

The hydraulic oil radiator (option) is located in the cabin on the left. It cools 
the hydraulic oil of the steering and operating hydraulics.

WARNING

Caustic injury hazard! Risk of swallowing when handling
hydraulic oil!

Can cause serious injury or death

►

Seek medical attention immediately if antifreeze has been swallowed.

►

Keep hydraulic oil out of reach of children.

CAUTION

Burn hazard from hot hydraulic lines!

Hot hydraulic lines can cause skin burns.

►

Allow hydraulic lines to cool down.

►

Wear protective equipment.

Information on cleaning work on the cooling system

Dirt on the radiator fins reduces the radiator’s cooling capacity!
To avoid this:
• Clean the outside of the radiator at regular intervals. Refer to the 

servicing schedule on page 

7-6

 for the cleaning intervals.

• In dusty or dirty work conditions, clean more frequently than indicated 

in the maintenance plans.

• If the hydraulic oil must be replaced frequently, have the hydraulic 

system checked for leaks by an authorized service center!

Environment

Use a suitable container to collect the hydraulic oil as it drains and dispose 
of it in an environmentally friendly manner!

Содержание KRAMER 5055e





































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды