Wacker Neuson KRAMER 5055e страница 19 Скачать руководство пользователя

Страница: 19 / 420

BA 357-00 * 3.0 * Sicherheit_E.fm

2-7

Safety 2

Carrying passengers

• Carrying passengers with the machine is

NOT

allowed.

• Carrying passengers on/in attachments/tools is

NOT

allowed.

• Carrying passengers on/in trailers is

NOT

allowed.

Mechanical integrity

• The operator and owner are obligated to operate the vehicle only in a

safe and working condition.

• Operate the machine only if all protective and safety-oriented

equipment (for example protective structures such as a cabin or
rollbar, removable safety devices) is installed and functional.

• Check the vehicle for visible damage and defects.
• In case of damage and/or unusual behavior, put the vehicle out of

operation immediately and secure it against restart.

• Have all malfunctions jeopardizing the safety of the operator or other

persons immediately repaired by an authorized service center.

Turn on the machine

• Start the machine only according to the Operator’s Manual.
• Observe all warning lights and indicator lights.

Machine operation

• Start and operate the machine only with the seat belt fastened and only

from the place provided for this.

• Put the vehicle into operation only if visibility is sufficient

(have another person guide you if necessary).

• Operation on slopes:

- Travel/work only uphill or downhill.
- Avoid traveling across a slope. Observe the machine’s permissible

inclination (of the trailer if necessary).

- Keep loads on the uphill side of the vehicle and as

close as possible to it.

- Keep attachments/work equipment close to the ground.

• Adapt the travel speed to the circumstances

(for example, the ground conditions, weather conditions).

• There is increased danger during backward machine travel. Persons in

the blind spot of the machine cannot be seen by the operator.
- Ensure that nobody is in the danger zone when you change the

travel direction.

• Never get on a moving vehicle and never jump off the vehicle.

Содержание KRAMER 5055e





































































































































































































































































































































































































































Результаты поиска

Содержание KRAMER 5055e

Отзывы:

Похожие инструкции для KRAMER 5055e

Бренды по названию

Популярные бренды

Wacker Neuson KRAMER 5055e, Руководство оператора

Результаты поиска

Содержание KRAMER 5055e

Отзывы:

Похожие инструкции для KRAMER 5055e

Бренды по названию

Популярные бренды