8 Use and operation
20
100_0101_op_0003.fm
8.3
Decommissioning
Switching off the machine
1. Slowly remove the machine from the fresh concrete; hold the vibrator head in
the air.
2. Switch off the machine via the ON/OFF switch.
Note:
If there is no ON/OFF switch on the machine, switch off the machine via
the ON/OFF switch of the inverter.
3. Turn off the inverter.
4. Wait until the machine has come to a complete standstill.
5. Put down the machine slowly.
Do not kink the protective hose and power cable!
6. Disconnect the machine from the inverter.
8.4
Cleaning
Cleaning the machine
Clean the machine and all components with water after each use.
Note:
You can remove concrete residuals by immersing the running machine into
gravel.
CAUTION
The vibrator head moves if it is turned on and not immersed in the fresh con-
crete.
Danger of injury or danger of damage to property by uncontrolled vibrator head.
Switch the machine off before you put it down.
CAUTION
The vibrator head heats up if it is turned on and not immersed in the fresh con-
crete.
Hot surface can cause burns.
Damage to the machine with excessive wear.
Do not operate the machine with the internal vibrator not immersed in the
fresh concrete.
