background image

3 Safety

16

3.6

Safety during the operation of electric appliances

Specific regulations for electrical appliances

Observe the safety information provided in the brochure 

General Safety Rules

 

which is included in the scope of delivery of your machine.

Also observe the country-specific regulations, standards and guidelines in refer-
ence to accident prevention in connection with electrical equipment and ma-
chines.

 WARNING Read all safety information and instructions. 

Failure to follow 

the safety information and instructions may result in electric shock, fire and/or se-
rious injury. 

 

 

Save all safety information and instructions for future reference.

 

Electric power supply for electrical appliances of class rating I

Note:

The rated voltage is indicated on the nameplate of your machine.

 

The machine must be connected to a 15 A/16 A shock-proof plug receptacle 
(continental type) with a corresponding overload protection.

One of the following fault current protective switches is required:

„

Standard fault current protective switch (AC sensitive, Type A).

„

AC/DC sensitive fault current protective switch (Type B).

The machine may only be connected to an electric power supply with all machine 
parts in proper working condition. Take special notice of the following compo-
nents:

„

Plug.

„

Power cable over the entire length.

„

Switch diaphragm of the ON/OFF switch, if there is one.

„

Plug receptacles.

 

The machine may only be connected to an electric power supply whereby the 
connector of the grounded conductor (PE) is intact.

 

There must be at least one of the following safety devices if connected to a sta-
tionary or mobile generator:

„

Fault current protective switch.

„

Isolation (earth leakage) monitor.

„

IT-net.

 

If you connect your machine to a worksite distribution board, the worksite distri-
bution board must be grounded.

 

Note:

Observe the respective national safety regulations!

Содержание FUE Series

















































Отзывы: