Wacker Neuson FUE 6, Руководство оператора

Страница: 21 / 36

FUE 6 Operation
21
7.2 Starting up
Connecting the machine to the power supply
The machine may only be connected to AC single phase, connection values see
chapter
Technical Data .
1. Switch off the inverter via the ON/OFF switch.
2. Switch off all connected machines via the respective equipment switch.
3. If required, connect the machine to a permitted extension cable.
Note: See chapter Technical data for the permitted lengths and cross-section
areas of extension cables.
4. Insert the plug into the plug receptacle.
WARNING
A damaged machine part or power cable can result in personal injury caused by
electric current.
f Do not operate a damaged machine!
f Have a damaged machine repaired immediately.
NOTICE
Electrical voltage.
Incorrect voltage can cause damage on the machine.
f
Check if the voltage of the current source corresponds with the information
of the machine, see chapter
Technical Data .
WARNING
Starting the connected machines.
Danger of injuries from uncontrolled starting of the machines.
f
Deactivate all connected machines before connection to the electric power
supply.
WARNING
Electrical voltage.
Injuries from electrocution.
f Check power cable and extension cable for signs of damage.
f Only use extension cables for which grounded conductors are connected to
the plug and the coupling (only for machines of class rating I).