Wacker Neuson FUE 6, Руководство оператора

Страница: 13 / 36

FUE 6 Safety information
13
3.6 Safety during the operation of electric appliances
Specific regulations for electrical appliances
Observe the safety information provided in the brochure General Safety Rules
which is included in the scope of delivery of your machine.
Also observe the country-specific regulations, standards and guidelines in refer-
ence to accident prevention in connection with electrical equipment and ma-
chines.
Electric power supply for electrical appliances of class rating I
Note: The rated voltage is indicated on the nameplate of your machine.
The machine must be connected to a 16 A (1~) shock-proof plug receptacle
(continental type) with a corresponding overload protection.
A standard fault current protective switch (AC sensitive, Type A) is required.
The machine may only be connected to an electric power supply with all machine
parts in proper working condition. Take special notice of the following machine
parts:
„
Plug.
„
Power cable over the entire length.
„
All plug receptacles.
Note: Make sure that the plugs and power cables of the machines to be con-
nected are in proper working condition.
The machine may only be connected to an electric power supply whereby the
connector of the grounded conductor (PE) is intact.
There must be at least one of the following safety devices if connected to a sta-
tionary or mobile generator:
„
Fault current protective switch.
„
Isolation (earth leakage) monitor.
„
IT-net.
If you connect your machine to a worksite distribution board, the worksite distri-
bution board must be grounded.
Note: Observe the respective national safety regulations!