Wacker Neuson EZ38 Скачать руководство пользователя страница 138

Страница: 138 / 254

5-42

OM EZ38 us 1.1 * ez38b510.fm

5.11 Work operation

Inadmissible work procedures

Working with the swivel force

• Do not use the swivel force of the upper carriage to tear down walls or

to create level surfaces.

• Never ram the attachment into the ground when swiveling the upper

carriage.

➥

This can damage the machine or the attachment.

Working with the travel force

• Never ram the attachment into the ground to dig when traveling.

➥

This can damage the machine or the attachment.

Retracting the attachment

• During retracting the attachment, ensure that it does not touch the

stabilizer blade.

Avoid impact during operation to avoid damage to the excavator
bucket and machine components.

• Do not use the falling force of the attachment as a hoe, hammer or pile-

driver.

➥

Working this way can greatly reduce the machine’s service life.

Fig. 187

Fig. 188

Fig. 189

Fig. 190

Содержание EZ38































































































































































































































































Результаты поиска

Содержание EZ38

Отзывы:

Похожие инструкции для EZ38

Бренды по названию

Популярные бренды

Wacker Neuson EZ38, Руководство оператора

Результаты поиска

Содержание EZ38

Отзывы:

Похожие инструкции для EZ38

Бренды по названию

Популярные бренды