manualshive.com logo in svg

Wacker Neuson ET35, Руководство оператора

Поделиться
Скачать
Wacker Neuson ET35 Скачать руководство пользователя страница 18

2-4

BA E16 en* 1.0 * E16_10_200a.fm

 

2 Safety

2.4

Operation

Preparatory measures

• Operation is only allowed with correctly installed and intact protective 

structures.

• Keep the vehicle clean. This reduces injury, accident and fire hazards.
• Safely store objects you carry with you in the places provided for this 

(for example in the storage compartment, drinks holder).

• Do not carry objects with you that protrude into the operator’s work 

space. They can create another danger in case of an accident.

• Observe all safety, warning and information labels.
• Start and operate the vehicle only with the seat belt fastened and only 

from the place provided for this.

• Check the condition and the fastening of the seat belt. Have malfunc-

tioning seat belts and mounting hardware replaced by an authorized 
service center.

• Before starting work, adjust the seating position so that all control 

elements can be reached and fully operated.

• Perform the personal adjustment at machine standstill only (for 

example of the operator seat, steering column).

• Ensure that all safety devices are properly installed and functional 

before starting work.

• Before starting work or after interrupting work, ensure that the brake, 

steering, signaling and light systems are functional.

• Before putting the vehicle into operation, ensure that nobody is in the 

danger zone.

Содержание ET35















































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды