Wacker Neuson ET35 Скачать руководство пользователя

Страница: 144 / 302

5-34

BA E16 en* 1.0 * E16_10_510.fm

5 Operation

Lifting gear operation

Lifting gear applications are procedures involving raising, transporting and
lowering loads with the help of lifting and fastening gear.

DANGER

Crushing hazard due to tipping over of vehicle!

The vehicle causes serious injury or death when it tips over.

► Do not exceed the weights indicated in the load diagrams.
► Subtract the weight of the attachment from the weight specified in the

relevant load diagram.

► Use the vehicle for lifting gear applications only if the mandatory lifting

gear and safety equipment is installed, functional and enabled.

► The subgrade must be horizontal, even, and have a high load-bearing

capacity.

► Do not tilting the upper carriage.

WARNING

Risk of vehicle tipping over due to failure to pay attention to the safe
load indicator!

Serious injury or death can be caused by a vehicle tipping over.

► Reduce the load until both the buzzer and the indicator light on the

display element go out.

► Observe the load diagrams.

WARNING

Accident hazard due to switched-off or malfunctioning safe load
indicator!

Serious injury or death can be caused by a vehicle tipping over.

► Switch on the safe load indicator during lifting gear applications.
► Operate the vehicle only with an intact safe load indicator.

Содержание ET35















































































































































































































































































































Результаты поиска

Содержание ET35

Отзывы:

Похожие инструкции для ET35

Бренды по названию

Популярные бренды

Wacker Neuson ET35, Руководство оператора

Результаты поиска

Содержание ET35

Отзывы:

Похожие инструкции для ET35

Бренды по названию

Популярные бренды