manualshive.com logo in svg

Wacker Neuson ET18, Руководство оператора

Поделиться
Скачать
Wacker Neuson ET18 Скачать руководство пользователя страница 86

4-36

OM ET18/20/24 us 1.3 * et18_20_24i400.fm

 

4

Fuel level indicator

Indicates the remaining amount of fuel in the tank.

Refuel immediately if the segments reach the red range.

Coolant temperature

Indicates the current coolant temperature of the engine.

The indicator light illuminates if the segments reach the red range. 
•

Stop the engine immediately.

•

Let the engine cool down and check the coolant level.

Hour meter/maintenance meter

Counts the engine service hours with the engine running.

Hour meter

The counter runs as soon as the charge indicator light goes out. The 
hour meter is used for specifying the maintenance intervals.

Maintenance meter

The maintenance meter starts at 500.0 hours. It counts down to 0.0 
hours. A wrench symbol flashes as soon as the maintenance meter 
reaches this value. The meter keeps on counting down (

−

0.1 hours, 

−

0.2 hours, etc.).

Symbol

Designation

Содержание ET18











































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды