manualshive.com logo in svg

Wacker Neuson ET18, Руководство оператора

Поделиться
Скачать
Wacker Neuson ET18 Скачать руководство пользователя страница 232

9-14

OM ET18/20/24 us 1.3 * et18_20_24t900.fm

 

9

9.14 Payload/stability

Safety instructions – lift capacity table

The values of the lift capacity table apply to normal operation (for example 
excavating, etc.) (The values of the stability table apply to lifting gear 
applications).

DANGER

Crushing hazard due to tipping over of the machine.

Causes severe crushing or injury resulting in death.

►

The authorized lift capacity specified in the table must never 
be exceeded (the smallest value applies).

►

Get informed on the lift capacity of the attachment before 
using it.

►

If a bucket or attachment (hammer, etc.) is installed, the dead 
weight and the contents of the bucket must be subtracted 
from the lift capacity specified in the table. Load density must 
also be taken into account.

Notice

If the specified lift capacity is exceeded, possible damage to 
property due to tipping over of the machine.

►

The authorized lift capacity specified in the table must never 
be exceeded (the smallest value applies).

Information

The indications are only approximate values. Attachments, 
uneven ground and soft or bad ground conditions affect lift 
capacity. The operator must take these influences into account.

Содержание ET18











































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды