Wacker Neuson ET18 Скачать руководство пользователя страница 198

Страница: 198 / 298

7-36

OM ET18/20/24 us 1.3 * et18_20_24w700.fm

Cleaning the radiator

CAUTION

Burn hazard when performing maintenance on the radiator!

Can cause injuries.

►

Stop the engine and allow it to cool down at least 10 minutes.

►

Wear protective gloves and eye protection.

Notice

Dirt on the radiator fins reduces the radiator’s heat dissipation
capacity and can cause damage to the diesel engine and the
hydraulic system!

►

Check and if necessary clean the radiator once a day.

►

In dusty or dirty work conditions, clean more frequently than
indicated in the maintenance plans.

Notice

In order to ensure the radiator’s optimal cooling capacity, do not
damage the radiator fins as you clean them with a compressed-
air gun!

►

Maintain a sufficient distance from the radiator to avoid
damage to the radiator fins.

►

Use oil-free compressed air (2 bar/29 psi max.) to clean.

Water radiator

and hydraulic oil radiator

are located behind the right-

hand cover.

1. Stop and park the machine. Stop the engine. See “Preparing

lubrication”.

2. Remove the right-hand cover.

3. Remove dust and other foreign bodies from the fins with compressed air.

4. Install the side cover.

Fig. 252: Cleaning the radiator

Содержание ET18











































































































































































































































































































Результаты поиска

Содержание ET18

Отзывы:

Похожие инструкции для ET18

Бренды по названию

Популярные бренды

Wacker Neuson ET18, Руководство оператора

Результаты поиска

Содержание ET18

Отзывы:

Похожие инструкции для ET18

Бренды по названию

Популярные бренды