manualshive.com logo in svg

Wacker Neuson ET18, Руководство оператора

Поделиться
Скачать
Wacker Neuson ET18 Скачать руководство пользователя страница 196

7-34

OM ET18/20/24 us 1.3 * et18_20_24w700.fm

 

7

7.9

Cooling system

Information regarding the cooling system

The oil/water radiator is located behind the right-hand cover, on the right 
side of the engine. It cools the diesel engine, and the hydraulic oil of the 
travel and work hydraulics.

Notice

In order to avoid damage to the engine and radiator.

►

Observe the fluids and lubricants table, and the coolant 
compound table.

►

Check the coolant level once a day.

Checking the coolant level

1. Stop and park the machine. Stop the engine. See “Preparing 

lubrication”.

2. Open the engine cover.

3. Check the coolant level on sight glass 

A

.

4. If the coolant level is below the 

FULL 

mark:

➥

Add coolant.

5. Close and lock the engine cover.

Information

Check the coolant level once a day.
We recommend checking it before starting the engine.
Observe the coolant compound table.

Fig. 250: Checking the coolant level

A

FULL

Содержание ET18











































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды