manualshive.com logo in svg

Wacker Neuson ET18, Руководство оператора

Поделиться
Скачать
Wacker Neuson ET18 Скачать руководство пользователя страница 188

7-26

OM ET18/20/24 us 1.3 * et18_20_24w700.fm

 

7

7.7

Fuel system

Information regarding the fuel system

Information

Fill up the tank with the correct fuel type at the end of each 
working day to prevent the formation of condensation water in 
the fuel tank. Do not fill the tank completey so the fuel can 
expand.

Information

Do not run the fuel tank completely dry. Otherwise, air is drawn 
into the fuel system. This requires bleeding the fuel system.

Diesel fuel specification

Notice

Use only the diesel fuels indicated.

►

If other fuels are used, warranty rights shall not apply in case 
of diesel engine damage.

►

Do not use diesel fuel with additives.

– see “Fluids and lubricants” on page 7-10

Refueling

WARNING

Explosion hazard when handling fuel!

Can result in severe burns or death.

►

Never perform work on the fuel system in the vicinity of open 
flames or sparks.

►

Do not smoke.

►

Keep the maintenance area clean.

►

Do not refuel in closed rooms.

Содержание ET18











































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды