manualshive.com logo in svg

Wacker Neuson ET18, Руководство оператора, Страница: 116 / 298

Поделиться
Скачать
Wacker Neuson ET18 Скачать руководство пользователя страница 116

5-22

OM ET18/20/24 us 1.3 * et18_20_24b510.fm

 

5

Proportional controls (option)

The proportional controls make it possible to adjust the movement speed 
of the attachment. Moving the control lever slowly causes the attachment 
to move slowly.

This control mode offers proportional operation of the auxiliary hydraulics 
depending on the position of slide switch 

A

 on the control lever.

If precision machine operation (for example with an offset bucket) does 
not require the full oil flow of the auxiliary hydraulics (AUX I and AUX II), 
turn the rotary switch to the left (MIN).

If the full oil flow is required, turn the rotary switch to the right (MAX).

A

Fig. 149: Control lever for proportional controls

Fig. 150: Rotary switch on left-hand control lever 

base

Fig. 151: Rotary switch on right-hand control 

lever base

Содержание ET18











































































































































































































































































































Отзывы:

Нет отзывов