manualshive.com logo in svg

Wacker Neuson ET18, Руководство оператора

Поделиться
Скачать
Wacker Neuson ET18 Скачать руководство пользователя страница 109

OM ET18/20/24 us 1.3 * et18_20_24b510.fm 

5-15

5

Rotating the upper carriage

WARNING

Accident hazard! Upper carriage can rotate a little bit 
farther.

Can result in severe injury or death.

►

Until the hydraulic fluid reaches operating temperature, the 
upper carriage can rotate farther than expected after the 
control is placed in the neutral position.

►

If the machine is equipped with an extra weight (option), the 
upper carriage projects beyond the tracks when it is rotated.

►

Ensure that there are no obstacles in the immediate area 
before rotating the upper carriage.

►

Fast actuation of the control lever rotates the upper carriage 
fast, slow actuation of the control lever rotates the upper 
carriage slowly.

►

If the upper carriage needs to be rotated on a slope, let the 
engine run at idling speed and actuate the control lever very 
slowly. Proceed with extreme care and avoid abrupt 
movements if the bucket is full.

Rotating the upper carriage to the left

Push the left-hand control lever to the left.

Rotating the upper carriage to the right

Push the left-hand control lever to the right.

Swivel unit brake

The swivel unit brake is enabled if:

•

the control lever base is raised.

•

Starter is turned to position 

0

 or the engine is stopped.

This secures the upper carriage against rotation.

Fig. 138: Rotating the upper carriage to the left

Fig. 139: Rotating the upper carriage to the right

Содержание ET18











































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды