Wacker Neuson ET18 Скачать руководство пользователя страница 105

Страница: 105 / 298

OM ET18/20/24 us 1.3 * et18_20_24b500.fm

5-11

5.8

Heating, ventilation and air conditioning system

Ventilation/heating (option)

The switch is located on the right-hand switch panel.

Adjust the nozzles so that the required temperature can be reached.

Air the cab from time to time.

Information

If the windows are fogged or iced up, adjust the nozzles to the
front and open them completely.

Temperature setting

The temperature controller is located at the right behind the seat.

Cooling

Turn temperature controller

toward

Heating

Turn temperature controller

toward

Fig. 134: Ventilation/heating

Position

Function

1st position

Press switch

down one

step

Low fan speed

2nd posi-
tion

Press switch

down two

steps

High fan speed

OFF

Press switch

all the way

Fan is switched off

Fig. 135: Air vents

Fig. 136: Temperature setting

Содержание ET18











































































































































































































































































































Результаты поиска

Содержание ET18

Отзывы:

Wacker Neuson ET18, Руководство оператора, Страница: 105 / 298

Результаты поиска

Содержание ET18

Отзывы: