manualshive.com logo in svg

Wacker Neuson ET16, Руководство оператора

Поделиться
Скачать
Wacker Neuson ET16 Скачать руководство пользователя страница 199

BA ET16 de*   1.0 *  et16w700.fm 

7-31

Maintenance 7

7.9

Cooling system

Important information regarding the cooling system

The radiator is located on the right in the engine compartment.

WARNING

Poisoning hazard due to hazardous substances!

Contact with hazardous substances can cause serious injury or death.

►

Wear protective equipment.

►

Do not inhale or swallow coolant.

►

Avoid contact of the coolant or antifreeze with the skin and eyes.

WARNING

Burn hazard due to coolant or antifreeze!

The coolant and antifreeze are easily flammable fluids that can cause 
serious burns or death if they are brought into contact with fire or open 
flames.

►

Wear protective equipment.

►

Only perform maintenance on an engine that has cooled down.

►

Fire, open flames and smoking is prohibited.

WARNING

Burn hazard due to hot coolant!

At high temperatures, the cooling system is under pressure and can cause 
burning of the skin.

►

Wear protective equipment.

►

Let the engine cool down.

►

Carefully open the radiator cap.

NOTICE

Possible engine damage due to wrong coolant.

►

Observe the engine/vehicle fluid table or coolant compound table.

NOTICE

Possible engine damage due to low coolant level.

►

Check the coolant level once a day.

Содержание ET16

























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды