manualshive.com logo in svg

Wacker Neuson ET16, Руководство оператора

Поделиться
Скачать
Wacker Neuson ET16 Скачать руководство пользователя страница 194

7-26

BA ET16 de*   1.0 *  et16w700.fm

 

7 Maintenance

Refueling

The filler neck of the fuel tank is located in the engine compartment.

1. Stop and park the machine. Stop the engine. See “Preparing 

lubrication”.

2. Open the engine cover.
3. Open tank lock 

A 

carefully to release the pressure in the fuel tank.

4. Refuel the machine.
5. Close the filler cap.

Stationary fuel pumps

Even the smallest particles of dirt can cause increased engine wear, 
malfunctions in the fuel system and reduced effectiveness of the fuel 
filters.

Refueling from barrels

If refueling from barrels cannot be avoided, note the following points:
• Barrels must neither be rolled nor tilted before refueling.
• Protect the suction pipe opening of the barrel pump with a fine-mesh 

screen.

• Immerse the suction pipe opening down to a max. 15 cm (6 in) above 

the bottom of the barrel.

• Only fill the tank using refueling aids (funnels or filler pipes) with an 

integral microfilter.

• Keep all refueling containers clean.

Fig. 228

A

Содержание ET16

























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды