Wacker Neuson ET16 Скачать руководство пользователя страница 189

Страница: 189 / 248

BA ET16 de* 1.0 * et16w700.fm

7-21

Maintenance 7

7.5

Cleaning and maintenance

WARNING

Injury hazard due to rotating parts!

Rotating parts can cause serious injury or death.

►

Open the engine cover only at engine standstill.

WARNING

Burn hazard due to hot surfaces!

Hot surfaces can cause serious burns or death.

►

Stop the engine and let it cool down.

►

Wear protective equipment.

CAUTION

Health hazard due to cleaning agents!

Cleaning agents can be harmful to health.

►

Use only suitable cleaning agents.

►

Ensure sufficient ventilation.

NOTICE

Damage to rubber and electrical parts when cleaning with solvents.

Do not use solvents, benzine, or other aggressive chemicals.

NOTICE

Damage to electronics due to water jet.

►

Do not point the water jet directly at electric components, and protect
the electric components against humidity.

►

If water contacts electrical components, dry them with compressed air
and apply contact spray to them.

Environment

In order to avoid damage to the environment, clean the machine only in
wash bays and places authorized by the authorities.

Содержание ET16

























































































































































































































































Результаты поиска

Содержание ET16

Отзывы:

Бренды по названию

Популярные бренды

Wacker Neuson ET16, Руководство оператора

Результаты поиска

Содержание ET16

Отзывы:

Бренды по названию

Популярные бренды