manualshive.com logo in svg

Wacker Neuson ET16, Руководство оператора

Поделиться
Скачать
Wacker Neuson ET16 Скачать руководство пользователя страница 152

5-50

BA ET16 de*   1.0 *  et16b510.fm

 

5 Operation

Loading material

Notes on loading site dumpers:

- Position the site dumper so that its cabin is outside the danger zone 

of the excavator.

- The loading platform of the truck is loaded by starting at the rear end.
- Keep the swivel angle as small as possible.
- Raise the full bucket to dump height only as you rotate toward the 

site dumper.

- Tilt out dusty material with the wind behind you to keep the dust 

away from your eyes, air filters and fans.

- If possible, the site dumper and the working direction of the bucket 

should form an angle of 45°.

Grading

The stabilizer blade is used for filling up trenches or grading the ground.
Lower the stabilizer blade to the ground for grading work.
Set the depth of the layer you want to remove with the stabilizer-blade 
lever.

➥

The machine must not be raised by lowering the stabilizer blade.

➥

Do not dig in the machine or let it sink in.

Digging position

Place stabilizer blade 

A

 on the side you want to dig.

Fig. 189

Fig. 190

Fig. 191

A

Содержание ET16

























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды