Wacker Neuson ET16 Скачать руководство пользователя страница 124

Страница: 124 / 248

5-22

BA ET16 de* 1.0 * et16b510.fm

5 Operation

Hammer operation

Only break in the prescribed work area with shatter protection.

– see chapter “ Shatter protection (option)” on page 4-20

The machine is not certified for demolition work according to EN 474-5.
A front guard cannot be attached.

WARNING

Danger of piercing/penetration by objects from the front!

Work involving risk of piercing/penetrating by objects from the front can
cause accidents with serious injury or death.

►

During operation, all persons must stay clear of the job site of the
machine.

►

Observe the mandatory limits of the work area.

►

Do not hammer horizontally or upward.

►

Only break with the attached shatter protection.

WARNING

Accident hazard due to tipping over of machine!

A tipping machine can cause serious injury or death.

►

During operation, all persons must stay clear of the job site of the
machine.

►

The machine can lose its balance and tip over if a hammer or other
heavy attachment is used.

►

Never turn, lower or set down the attachment abruptly.

►

Do not extend or retract the boom abruptly.

►

Do not use the impact force of the attachment to perform demolition
work. Broken or falling pieces can cause serious injury.

►

Use a hammer only at machine standstill.

Information

In combination with Powertilt, only use the smallest possible released
hydraulic breaker.

Содержание ET16

























































































































































































































































Результаты поиска

Содержание ET16

Отзывы:

Бренды по названию

Популярные бренды

Wacker Neuson ET16, Руководство оператора

Результаты поиска

Содержание ET16

Отзывы:

Бренды по названию

Популярные бренды