manualshive.com logo in svg

Wacker Neuson ET12 02, Руководство оператора

Поделиться
Скачать
Wacker Neuson ET12 02 Скачать руководство пользователя страница 79

BA ET18, 20, 24 en*  1.5 * et18_20_24i400.fm 

4-19

Putting into operation

4

Protective structures

Protective structures are additional elements that protect the operator or 
user against hazards. These elements can be installed later on or as 
standard equipment.

DANGER

Accident hazard due to modified cabin and protective structures!

Causes serious injury or death.

►

No drilling, cutting or grinding.

►

Do not install any brackets.

►

No welding, straightening or bending.

►

Replace the complete protective structure if it is damaged, deformed or 
cracked.

►

Contact a Wacker Neuson service center in case of doubt.

►

Retrofit and repair work may only be performed by a Wacker Neuson 
service center.

Information

Machine operation is only allowed with a correctly installed and intact 
cabin or correctly installed and intact canopy.

For additional protection, only use correctly installed and intact Wacker 
Neuson protective structures that have been released for the machine.

Information

Only a Wacker Neuson service center may install the protective structures 
for the first time.

Responsibility for machine equipped with protective structures

The decision regarding the necessary protective structures (type and level 
I or II) must be made by the machine owner and depends on the specific 
work situation.
The machine owner must observe the national regulations and he must 
inform the operator on the protective structure to be used in a specific 
work situation.

Содержание ET12 02































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды