manualshive.com logo in svg

Wacker Neuson ET12 02, Руководство оператора

Поделиться
Скачать
Wacker Neuson ET12 02 Скачать руководство пользователя страница 26

2-10

BA ET18, 20, 24 en*  1.5 * Sicherheit_12072013.fm

 

2 Safety

2.6

Trailer operation

Trailer operation

• The machine must be certified for trailer operation.
• Observe the national regulations for trailer operation.
• The specific national driving license is required.
• Carrying passengers on/in trailers is PROHIBITED.
• Observe the maximum permissible vertical and trailer load.
• Do not exceed the permissible trailer speed.
• Trailer operation with the towing gear of the machine is prohibited.
• Trailer operation changes the machine’s operating behavior, the 

operator must be familiar with this and act accordingly.

• Bear in mind the machine’s steering mode and the trailer’s turning 

circle.

• Before hitching/unhitching the trailer, secure it to prevent it from rolling 

away (for example with the parking brake, suitable wheel chocks).

• There must be nobody between the machine and the trailer when 

hitching a trailer.

• Hitch the trailer onto the machine correctly.
• Ensure that all equipment works correctly (for example the brakes, 

lights).

• Before starting machine travel, ensure that nobody is between the 

machine and the trailer.

2.7

Operation of attachments

Attachments

• Use only attachments that are certified for the machine or its protective 

equipment (for example a shatter protection).

• All other attachments require the machine manufacturer’s release.
• The danger zone and the work zone depend on the attachment used – 

see the Operator’s Manual of the attachment.

• Secure the load.
• Do not overload attachments.
• Check the correct position of the lock.

Operation

• Carrying persons on/in an attachment is prohibited.
• Installing a work platform is prohibited.

- Exception: The machine is certified and equipped with the necessary 

safety equipment.

• Attachments and counterweights modify handling, as well as the 

steering and brake capability of the machine.

• The operator must be familiar with these modifications and act accord-

ingly.

• Before starting work, operate the attachment to check that it works 

correctly.

• Before putting the attachment into operation, ensure that nobody is in 

danger.

• Lower the attachment to the ground before leaving the operator seat.

Содержание ET12 02































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды