manualshive.com logo in svg

Wacker Neuson ET12 02, Руководство оператора

Поделиться
Скачать
Wacker Neuson ET12 02 Скачать руководство пользователя страница 218

7-40

BA ET18, 20, 24 en*  1.5 * et18_20_24w710.fm

 

7 Maintenance

7.12 Hydraulic system

Important information on the hydraulic system

WARNING

Burn hazard when performing maintenance on a hot engine and 
hydraulic system.

Can cause serious injury or death.

►

Wait at least 10 minutes after stopping the engine.

►

Wear protective equipment.

WARNING

Danger of fluid escaping under high pressure! Removing the filler 
plug can cause oil to escape.

Can cause serious injury or death.

►

Do not operate the machine with leaking or damaged hydraulic system 
components.

►

Open the breather filter carefully to slowly release the pressure inside 
the reservoir.

►

Wear protective equipment.

►

Wear safety glasses to protect the eyes. If oil contacts the eye

 

flush 

immediately with clean water and seek medical treatment.

►

Do not search for hydraulic leaks with your bare hands. Wear 
protective gloves and search for hydraulic leaks with a piece of 
cardboard.

►

Always consult a doctor immediately, even if the wound seems 
insignificant. Hydraulic oil causes blood poisoning.

NOTICE

In order to avoid damage to the hydraulic system:

►

Use hydraulic oil and grade according to fluids and lubricants table.

►

Add hydraulic oil using the filling screen.

►

Check the hydraulic oil level once a day.

►

If the hydraulic oil in the sight glass is cloudy, this indicates that water 
or air has penetrated the hydraulic system. Contact a Wacker Neuson 
service center.

►

If the hydraulic system is filled with biodegradable oil, then use only 
biodegradable oil of the same type for filling up – observe the sticker 
on the hydraulic oil reservoir.

►

Contact a Wacker Neuson service center if the filter of the hydraulic 
system is dirty.

Содержание ET12 02































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды